Global Surveillance Systems

1 Input to 6 Outputs Video Distributor

• Single input to 6 output video distributor
• Transmits video to 6 monitor
• maximum distance of 300 meters.

IP01 is a low cost and easy, speedy solution to allow you use existing coax cable to send IP camera signal. Used in pairs with your RG59 cable to exceed the IEEE 802.3 10BaseT NEXT specification. The working range could up to 200 meters at 10Mbps speed.

• IP01 IP Extender over Coax
• Send IP camera signal over existing coaxial cable.
• Passive, no power required.
• Exceeds 802.3 10BaseT NEXT specification, isolating the receiver from the transmitted signal.
• Transmission up to 200 meters (Max).

Extend of both power and data to beyond 100 meters. Send Power Over Ethernet to remote sites. Passive, no power need. Compatible with universal IEEE 802.3af POE standard.

• 4 Port Ethernet Switch w/ 4 Port BNC and 1 Port RJ45
• RJ45 Terminal Support 10/100 Mbps auto detect function
• BNC Terminal support 10Mbps, must with with EZ0IP-001
• LED IndicationL LInk/Active Power
• Complies w/Standard IEEE80.3 and IEEE802.3Uu
• Auto MDI/MDI-X auto cross at RJ45 terminal

• Cable hub
• Built in terminal block for DC power input
• Built in PTC fuse for short protection

• Passive video transceiver
• Four BNC male to RJ45 female
• 400 meter color transmission range
• B/W 600 meters via CAT 5 UTP cable

• Passive four channel video transceiver
• Four BNC female to one RJ45 female
• Eight pin terminal block

• Passive video transceiver
• 25 cm mini coax cable
• Weather proof: IR 65

• Passive video transceiver
• BNC male to RJ45 female with power cord
• 400 meter color transmission range
• B/W 600 meters via CAT 5 UTP cable

• Passive video transceiver
• BNC male to two pin terminal block
• 400 meter color transmission range
• B/W 600 meters via CAT 5 UTP cable

• Passive video transceiver
• BNC male to RJ45 female
• 400 meter color transmission range
• B/W 600 meters via CAT 5 UTP cable