10-27-2007, 04:42 AM
Modem Connection Setup
Please make sure that both remote view workstation and GV-System has modems installed properly. The GV-System will only supports external modems, the internal modem card will not work with this setup.
1. Click the [Network] button of the GV-System main screen and enable [Modem Server] from the menu.
2. Click on [Preference] then select [Configure Modem] from the sub-menu and the following window will appear. In the drop-down list select the proper modem in use.
3. Click the [Connect] button from Remote-View System’s menu bar, select Dial-Modem from the submenu and the following window will appear
4. Input the telephone number of the GV-System you wish to connect to in [Phone Dial] column. (this column will memorized 10 previously entered telephone numbers.)
5. Enter an authorized user’s ID and passwords then click [Make Call] button. To login successfully the [Connect Status] column should appear with the following message…
Make Call – XXXXXX
Line Hang Up!
Line Reply…
Login…
Please make sure that both remote view workstation and GV-System has modems installed properly. The GV-System will only supports external modems, the internal modem card will not work with this setup.
1. Click the [Network] button of the GV-System main screen and enable [Modem Server] from the menu.
2. Click on [Preference] then select [Configure Modem] from the sub-menu and the following window will appear. In the drop-down list select the proper modem in use.
3. Click the [Connect] button from Remote-View System’s menu bar, select Dial-Modem from the submenu and the following window will appear
4. Input the telephone number of the GV-System you wish to connect to in [Phone Dial] column. (this column will memorized 10 previously entered telephone numbers.)
5. Enter an authorized user’s ID and passwords then click [Make Call] button. To login successfully the [Connect Status] column should appear with the following message…
Make Call – XXXXXX
Line Hang Up!
Line Reply…
Login…